Measurements of thermal diffusivity, heat capacity and thermal expansion of X37CrMoV5-1 (1.2343) hot-work tool steel and Maraging 350 (1.6355) steel in the temperature range from -50 °C to 1000 °C were carried out in this paper. Both X37CrMoV5-1 and Maraging 350 are tested for military use as barrel steels. Thermophysical properties were tested using specialised test stands from NETZSCH. Thermal diffusivity was studied using both the LFA 427 laser flash apparatus in the temperature range of RT-1000 °C and the LFA 467 laser flash apparatus in the temperature range of -50 °C-500 °C. Specific heat capacity was investigated using a DSC 404 F1 Pegasus differential scanning calorimeter in the range RT-1000 °C, and thermal expansion was investigated using both a DIL 402 Expedis pushrod dilatometer in the range -50 °C-500 °C and a DIL 402 C in the range RT-1000 °C. Inconel 600 was selected as the reference material during the thermal diffusivity test using LFA467. Tests under the light microscope (LM), scanning electron microscopy (SEM) and Vickers microhardness measurements were carried out to detect changes in the microstructure before and after thermophysical measurements. This paper briefly characterises the research procedures used. In conclusion, the results of testing the thermophysical properties of X37CrMoV5-1 hot-work tool steel and Maraging 350 steel are compared with our results on 38HMJ (1.8509), 30HN2MFA and Duplex (1.4462) barrel steels. The thermophysical properties of X37CrMoV5-1 (1.2343) hot-work tool steel and Maraging 350 (1.6355) steel are incomplete in the literature. The paper presents the thermophysical properties of these steels over a wide range of temperatures so that they can be used as input data for numerical simulations of heat transfer in cannon barrels.
Keywords: X37CrMoV5-1 (1.2343) steel; maraging 350 (1.6355) steel; microstructures; specific heat capacity; thermal diffusivity; thermal expansion.