Developing a novel computer numerical control-fabricated laminar-flow microfluidic microbial fuel cells as the bioelectrochemical sensor and power source: Enrichment, operation, and Cr(VI) detection

Abstract

By introducing the computer numerical control (CNC) engraving technology, this study fabricated the reusable CNC-fabricated membrane-less laminar flow microfluidic MFC (LMMFC) to develop the bioelectrochemical sensor and power source simultaneously. To verify its applicability, optimization of electroactive bacteria (EAB) cultivation and laminar-flow formation, performance of power density and long-term operation, and detection of Cr(VI) were evaluated. Results of EAB optimization showed under lower external resistance, shorter start-up time of current production, larger oxidation current, denser microbial distribution, and a higher percentage of Geobacter spp. were observed. Results of the laminar-flow operation indicated that increasing the density difference between two solutions and raising the anode flow velocity can minimize the interference of the diffusion zone. The power output of LMMFC could reach 2085 mW m^-2 and achieve long-term stability for current production (∼150 h). Regarding the detection of Cr(VI), low-concentration (0.1∼1 ppm) and high-concentration (1-10 ppm) ranges reached the linear coefficient of determination of 0.98 and 0.97, respectively. Overall, these results suggest that an LMMFC which can both act as the power source and biosensor was successfully developed, showing potential for future self-power application.

Keywords: Biosensor; Computer numerical control engraving technology; Laminar-flow microfluidic microbial fuel cell; Power source.