Dynamic response characteristics and damage rule of graphite ore rock under different strain rates

Haiwang Ye; Xingwang Li; Tao Lei; Lifeng Li; Qizhou Wang; Ning Li

doi:10.1038/s41598-023-28947-9

Dynamic response characteristics and damage rule of graphite ore rock under different strain rates

Sci Rep. 2023 Feb 7;13(1):2151. doi: 10.1038/s41598-023-28947-9.

Authors

Haiwang Ye^{1

2}, Xingwang Li³, Tao Lei^{4

5}, Lifeng Li^{1

2}, Qizhou Wang^{1

2}, Ning Li^{1

2}

Affiliations

¹ School of Resources and Environment Engineering, Wuhan University of Technology, Wuhan, 430070, Hubei, China.
² Hubei Key Laboratory of Mineral Resources Processing and Environment, Wuhan University of Technology, Wuhan, 430070, Hubei, China.
³ School of Resources and Environment Engineering, Wuhan University of Technology, Wuhan, 430070, Hubei, China. xw_li_2020@whut.edu.cn.
⁴ School of Resources and Environment Engineering, Wuhan University of Technology, Wuhan, 430070, Hubei, China. leitao539@163.com.
⁵ Hubei Key Laboratory of Mineral Resources Processing and Environment, Wuhan University of Technology, Wuhan, 430070, Hubei, China. leitao539@163.com.

Abstract

In the process of mining graphite mine, rock mass is often subjected to dynamic loads such as blasting or mechanical crushing, which involves dynamic responses of different strain rates, and blasting and crushing effect are affected by the rock dynamic properties and damage specials. The dynamic response characteristics and damage rule of graphite ore rock under different strain rates are very important but rarely studied in the past. To study these issues and provide support for graphite ore rock mining, the dynamic compression tests of graphite ore rock under five kinds of impact pressures were designed and carried out by using the Split Hopkinson Pressure Bar (SHPB) test system, combining with the high-speed photography system and crushing screening tests. The dynamic characteristics, crushing process, crushing mode, crushing form and fragmentation distribution of the graphite ore rock under different strain rates were analyzed. The results show that the dynamic characteristics of the graphite ore rock have obvious strain rate effect. The hardening coefficient (DIF) is positively correlated with the cubic root of strain rate, and the softening factor (K) is negatively correlated with the cubic root of strain rate. Shear failure mainly occurs in the graphite ore rock under impact load, and the crushing process can be divided into five stages, they are compaction, crack initiation, crack expansion and penetration, fragmentation collision and fragmentation fall. In addition, the crushed blocks are mainly triangular pyramid (or cone-like) fine granular and powder. The broken fragments of the graphite ore rock are in accord with the fractal geometry characteristics. That is, the average broken particle size (d_S) decreases linearly with the increase of strain rate, and the fractal dimension (D_a) increases weakly with the increase of strain rate. Based on D-P fracture criterion and Weibull distribution model, the dynamic damage constitutive model of the graphite ore rock was established, and the correlation between strain rate and Weibull distribution parameters (m and F₀) was used to reasonably modify the damage constitutive model. The modified damage constitutive model curve is in good agreement with the experimental curve, which can basically reflect the strain rate effect of the dynamic characteristics of the graphite ore rock and the evolution characteristics of the dynamic stress-strain curve at different stage.

Abstract

Grants and funding