Degradation of odorous 2,4,6-trichloroanisole in chlorinated water by UV-LED/chlorination: kinetics and influence factors

Abstract

2,4,6-Trichloroanisole (2,4,6-TCA) has aroused a special concern for their odor problem and potential threats. In this study, the degradation of 2,4,6-TCA by UV/chlorination with different UV sources was compared, including low-pressure mercury lamp (LPUV, 254 nm) and ultraviolet light-emitting diode (UV-LED, 275 and 285 nm). The maximum removal of 2,4,6-TCA can be achieved by 275-nm UV-LED/chlorination in neutral and alkaline conditions which was 80.0%. The reaction, kinetics, and water matrix parameters on 2,4,6-TCA degradation were also evaluated. During UV-LED (275 nm)/chlorination, 2,4,6-TCA degradation was mainly caused by direct UV photolysis and indirect hydroxyl radical (HO·) oxidation, while reactive chlorine radicals (RCSs) had a negligible contribution. The second-order rate constant between HO· and 2,4,6-TCA was determined as 3.1 × 10⁹ M^-1 s^-1. Increasing initial chlorine dosage and decreasing 2,4,6-TCA concentration or pH value significantly promoted 2,4,6-TCA degradation during UV/chlorination process. The presence of natural organic matter (NOM) and bicarbonate (HCO₃^-) can inhibit 2,4,6-TCA degradation, while chloride ion (Cl^-) had a negligible effect. The kinetic model for 2,4,6-TCA degradation was established and validated, and the degradation pathways were proposed based on the identified intermediates. Furthermore, UV-LED (275 nm)/chlorination also exhibited a promising effect on 2,4,6-TCA removal in real water, which can be used to control 2,4,6-TCA pollution and odor problems.

Keywords: Degradation pathway; Hydroxyl radical; Kinetic model; Trichloroanisole (TCA); UV/chlorination; Ultraviolet light-emitting diode (UV-LED).