Hydrodynamic conditions are critical in bioprocessing because they influence oxygen availability for cultured cells. Processes in typical laboratory bioreactors need optimization of these conditions using mixing and aeration control to obtain high production of the desired bioproduct. It could be done by experiments supported by computational fluid dynamics (CFD) modeling. In this work, we characterized parameters such as mixing time, power consumption and mass transfer in a 2 L bioreactor. Based on the obtained results, we chose a set of nine process parameters to test the hydrodynamic impact on a selected bioprocess (mixing in the range of 0-160 rpm and aeration in the range of 0-250 ccm). Therefore, we conducted experiments with P. aeruginosa culture and assessed how various hydrodynamic conditions influenced biomass, pyocyanin and rhamnolipid production. We found that a relatively high mass transfer of oxygen (kLa = 0.0013 s-1) connected with intensive mixing (160 rpm) leads to the highest output of pyocyanin production. In contrast, rhamnolipid production reached maximal efficiency under moderate oxygen mass transfer (kLa = 0.0005 s-1) and less intense mixing (in the range of 0-60 rpm). The results indicate that manipulating hydrodynamics inside the bioreactor allows control of the process and may lead to a change in the metabolites produced by bacterial cells.
Keywords: aeration; bacterial biomass; bioprocessing; mixing; pyocyanin; rhamnolipids.