A series of Co3O4 with different surface defective structures were prepared by the solvothermal method and tested for the activity of benzene oxidation. The characterizations revealed that the synthetic solvent had a dramatic effect on the composition of Co3O4 precursors as well as the physicochemical properties of Co3O4. Although all Co3O4 exhibited a cubic spinel structure, Co3O4 prepared with triethylene glycol (Co-TEG) had the highest compressive strain due to the nature of high viscosity of triethylene glycol. These in turn affected the surface chemical structure and the low-temperature redox properties. Co-TEG exhibited the best benzene oxidation activity and showed excellent stability and good water resistance. In situ diffuse reflectance infrared Fourier transform spectroscopy was used to study the oxidation process of benzene. It was found that Co-TEG with more defective structures had abundant surface adsorbed oxygen and active lattice oxygen, which promoted the conversion of benzene and the corresponding intermediates at low temperature.
Keywords: VOC oxidation; cobalt oxide; compressive strain; lattice defect; solvent effect.