Biomechanical comparison of Tibial-sided supplemental fixation techniques in Bone-Patellar Tendon-Bone anterior cruciate ligament reconstruction

Knee. 2023 Mar:41:66-71. doi: 10.1016/j.knee.2022.12.005. Epub 2023 Jan 11.

Abstract

Purpose: The purpose of this study was to compare the biomechanical properties of a commercially available suture anchor and a screw post for supplemental tibial fixation of a bone-patellar tendon-bone (BTB) graft at time zero. We hypothesized that supplemental fixation using a suture anchor would demonstrate similar biomechanical performance in comparison with a screw post.

Methods: Sixteen fresh frozen, healthy human cadaveric knees underwent BTB autograft harvest, placement, and primary tibial-sided interference screw fixation using a standardized technique performed by a single surgeon. Specimens were randomly assigned to one of two tibial-sided supplemental fixation groups (suture anchor or screw post), yielding eight specimens in each group. Each specimen was affixed to a custom loading apparatus, with the tibial tunnel aligned in a vertical position that allowed for parallel "worst-case scenario" loading and eliminated loading variation due to tibial tunnel angle. Grafts were pretensioned to 30 N and biomechanical performance was compared with respect to cyclical loading between 50-250 N for 500 cycles at 0.5 Hz and pull-to-failure loading at 60 mm/min.

Results: The suture anchor and screw post supplemental constructs demonstrated similar performance with respect to all biomechanical parameters assessed, including yield strength (294.0 N [IQR 267.2-304.2 N] versus 332.1 N [IQR 313.8-350.4 N]; P = 0.079) and ultimate strength (330.1 N [IQR 306.9-418.7 N] versus 374.7 N [IQR 362.0-387.3 N]; P = 0.3798). However, of the eight original specimens in each group, one suture anchor specimen (12.5%) and six metallic screw post specimens (75%) failed during cyclical testing and were unable to undergo displacement and load to failure testing.

Conclusion: This study provides preliminary evidence that supplemental tibial-sided fixation of a BTB ACL graft with a suture anchor has similar loading characteristics or load-to-failure strength when compared to supplemental fixation with a screw post construct.

Study design: Laboratory Controlled Study.

Level of evidence: Basic Science Study.

Keywords: ACL reconstruction; Interference screw; Supplemental fixation; Tibial Fixation.

MeSH terms

  • Anterior Cruciate Ligament / surgery
  • Anterior Cruciate Ligament Injuries* / surgery
  • Anterior Cruciate Ligament Reconstruction* / methods
  • Biomechanical Phenomena
  • Humans
  • Patellar Ligament* / surgery
  • Tibia / surgery