The critical adenosine triphosphate (ATP) concentration in treated ballast water

Abstract

Measuring Adenosine triphosphate (ATP) provides a proxy to check compliance with IMO's ballast water D-2 standard: <10 cells mL^-1 in the 10-50 μm size class. Measured with standard boiling techniques the ATP concentration in aquatic eukaryotic microorganisms is 0.6 mol m^-3. Model calculations with 10-50 μm spherical organisms show their ATP content is 0.2 to 20 pg cell^-1, in line with several cell lysis data. However, at 10 cells mL^-1, these ATP contents lead to a maximum of only 2 to 200 pg ATP mL^-1, at least 7.5× below a D-2 test kit 1500 pg ATP mL^-1 upper limit. Different cell shape and ATP extraction scenarios to reach 1500 pg ATP mL^-1 are discussed but remain improbable. Because cell lysis data are inconclusive, and a novel phosphoric acid-benzalkonium chloride method indicates up to 3× higher ATP concentrations, an independent test kit validation and a comparison of all three techniques are recommended.

Keywords: Adenosine triphosphate (ATP); Ballast water; Compliance; Compliance monitoring devices (CMD); IMO; Model; Phosphoric acid benzalkonium chloride (P-BAC).