This article analyzes the influence of the initial deflection of the flat layers on the bending stiffness (BS) of honeycomb paperboards and presents two methods for its calculation. Both methods allow for the determination of BS in the main directions in the plane of the paperboard, i.e., the machine direction (MD) and the cross direction (CD). In addition, they have been verified by comparing the calculation results with the results of the BS measurements. The first method allowed for the calculation of the BS of cellular paperboard based on the mechanical properties of the paper used for its production. The second method allowed for the estimation of the BS of cellular paperboard based on the bending stiffness of other honeycomb paperboards with the same raw material composition and the same core cell size but with different thicknesses. In the first analytical method for the calculation of the bending stiffness of cellular paperboard, which does not include the deflections of the flat layers, the calculation results significantly differ from the measurement results, and they are overestimated. The second of the presented BS calculation methods allowed for a much more accurate assessment of paperboard's bending stiffness depending on its thickness.
Keywords: bending stiffness; elastic deformation; honeycomb paperboard; local buckling; mechanical properties.