In this study, a screen-printed electrode (SPE) modified with cobalt oxide nanoparticles (Co3O4 NPs) was used to create an all-solid-state ion-selective electrode used as a potentiometric ion sensor for determining nitrate ion (NO3-) concentrations in aquaculture water. The effects of the Co3O4 NPs on the characterization parameters of the solid-contact nitrate ion-selective electrodes (SC-NO3--ISEs) were investigated. The morphology, physical properties and analytical performance of the proposed NO3--ion selective membrane (ISM)/Co3O4 NPs/SPEs were studied by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), potentiometric measurements, and potentiometric water layer tests. Once all conditions were optimized, it was confirmed that the screen-printed electrochemical sensor had high potential stability, anti-interference performance, good reproducibility, and no water layer formation between the selective membrane and the working electrode. The developed NO3--ISM/Co3O4 NPs/SPE showed a Nernstian slope of -56.78 mV/decade for NO3- detection with a wide range of 10-7-10-2 M and a quick response time of 5.7 s. The sensors were successfully used to measure NO3- concentrations in aquaculture water. Therefore, the electrodes have potential for use in aquaponic nutrient solution applications with precise detection of NO3- in a complicated matrix and can easily be used to monitor other ions in aquaculture water.
Keywords: all-solid-state electrode; cobalt oxide; ion-selective electrode; nitrate ion detection; screen-printed electrodes.