Grinding-assisted liquid-phase exfoliation is a widely used method for the preparation of two-dimensional nanomaterials. In this study, N-methylpyrrolidone and acetonitrile, two common grinding solvents, were used during the liquid-phase exfoliation for the preparation of MoS2 nanosheets. The morphology and structure of MoS2 nanosheets were analyzed via scanning electron microscopy, X-ray diffraction, and Raman spectroscopy. The effects of grinding solvents on the gas-sensing performance of the MoS2 nanosheets were investigated for the first time. The results show that the sensitivities of MoS2 nanosheet exfoliation with N-methylpyrrolidone were 2.4-, 1.4-, 1.9-, and 2.7-fold higher than exfoliation with acetonitrile in the presence of formaldehyde, acetone, and ethanol and 98% relative humidity, respectively. MoS2 nanosheet exfoliation with N-methylpyrrolidone also has fast response and recovery characteristics to 50-1000 ppm of CH2O. Accordingly, although N-methylpyrrolidone cannot be removed completely from the surface of MoS2, it has good gas sensitivity compared with other samples. Therefore, N-methylpyrrolidone is preferred for the preparation of gas-sensitive MoS2 nanosheets in grinding-assisted liquid-phase exfoliation. The results provide an experimental basis for the preparation of two-dimensional materials and their application in gas sensors.
Keywords: MoS2 nanosheets; gas-sensitive properties; grinding solvent; liquid-phase exfoliation; two-dimensional materials.