Submicron long focusing range beams are gaining attention due to their potential applications, such as in optical manipulation, high-resolution lithography and microscopy. Here, we report on the theoretical and experimental characterization of an elastomeric polydimethylsiloxane/single layer graphene (PDMS/SLG) axicon-like tunable device, able to generate diffraction-resistant submicrometric spots in a pump and probe configuration. The working principle is based on the phase change of an input Gaussian beam induced in the elastomer via the thermo-optical effect, while the heating power is produced by the optical absorption of the SLG. The phase-modified beam is transformed by an objective into a long focus with submicron diameter. Our foci reach an experimental full width at half maximum (FWHM) spot diameter of 0.59 μm at the wavelength of 405 nm, with the FWHM length of the focal line greater than 90 μm. Moreover, the length of the focal line and the diameter of the focus can be easily tuned by varying the pump power. The proposed thermo-optical device can thus be useful for the simple and cheap improvement of the spatial resolution on long focus lines.
Keywords: axicons; beam shaping; graphene–PDMS hetero interfaces; long focusing devices; thermo-optical devices.