High-yield fabrication of electromechanical devices based on suspended Ti3C2Tx MXene monolayers

Saman Bagheri; Jehad Abourahma; Haidong Lu; Nataliia S Vorobeva; Shengyuan Luo; Alexei Gruverman; Alexander Sinitskii

doi:10.1039/d2nr05493k

High-yield fabrication of electromechanical devices based on suspended Ti₃C₂T_x MXene monolayers

Nanoscale. 2023 Jan 19;15(3):1248-1259. doi: 10.1039/d2nr05493k.

Authors

Saman Bagheri¹, Jehad Abourahma¹, Haidong Lu², Nataliia S Vorobeva¹, Shengyuan Luo¹, Alexei Gruverman^{2

3}, Alexander Sinitskii^{1

3}

Affiliations

¹ Department of Chemistry, University of Nebraska-Lincoln, Lincoln, NE 68588, USA. sinitskii@unl.edu.
² Department of Physics and Astronomy, University of Nebraska-Lincoln, Lincoln, NE 68588, USA.
³ Nebraska Center for Materials and Nanoscience, University of Nebraska-Lincoln, Lincoln, NE 68588, USA.

PMID: 36541680
DOI: 10.1039/d2nr05493k

Abstract

MXenes, two-dimensional transition metal carbides, nitrides, and carbonitrides, are known for their exceptional electronic and mechanical properties. Yet, the experimental efforts toward the realization of MXene-based nanoelectromechanical systems (NEMS) combining electrical and mechanical functionalities of MXenes at the nanoscale remain very limited. Here, we demonstrate a high-yield fabrication of the electromechanical devices based on individual suspended monolayer MXene flakes. We employed Ti₃C₂T_x, the most popular MXene material to date, that can be produced as high-quality micrometer-scale monolayer flakes with a high electrical conductivity of over 10 000 S cm^-1 and a high effective Young's modulus of about 330 GPa. These Ti₃C₂T_x flakes can be transferred over prefabricated trenches in a Si/Si₃N₄ substrate at a high yield, potentially enabling fabrication of hundreds of electromechanical devices based on suspended MXene monolayers. We demonstrate very clean, uniform, and well-stretched membranes with different dimensions, with Ti₃C₂T_x flakes suspended over trenches with gaps ranging from 200 nm to 2 μm. The resulting Ti₃C₂T_x monolayer membranes were electrostatically actuated, while their vertical displacement was monitored using a tip of an atomic force microscope (AFM). The devices reliably responded to the electrostatic actuation in ambient conditions over multiple cycles and with different measurement parameters, such as AC frequency, AC voltage amplitude, and AFM tip loading force. The demonstration of the high-yield fabrication of working electromechanical devices based on suspended Ti₃C₂T_x MXene membranes at the ultimate monolayer limit paves the way for the future exploration of the potential of MXenes for NEMS applications.