SLAM Back-End Optimization Algorithm Based on Vision Fusion IPS

Sensors (Basel). 2022 Dec 1;22(23):9362. doi: 10.3390/s22239362.

Abstract

SLAM (Simultaneous Localization and Mapping) is mainly composed of five parts: sensor data reading, front-end visual odometry, back-end optimization, loopback detection, and map building. And when visual SLAM is estimated by visual odometry only, cumulative drift will inevitably occur. Loopback detection is used in classical visual SLAM, and if loopback is not detected during operation, it is not possible to correct the positional trajectory using loopback. Therefore, to address the cumulative drift problem of visual SLAM, this paper adds Indoor Positioning System (IPS) to the back-end optimization of visual SLAM, and uses the two-label orientation method to estimate the heading angle of the mobile robot as the pose information, and outputs the pose information with position and heading angle. It is also added to the optimization as an absolute constraint. Global constraints are provided for the optimization of the positional trajectory. We conducted experiments on the AUTOLABOR mobile robot, and the experimental results show that the localization accuracy of the SLAM back-end optimization algorithm with fused IPS can be maintained between 0.02 m and 0.03 m, which meets the requirements of indoor localization, and there is no cumulative drift problem when there is no loopback detection, which solves the problem of cumulative drift of the visual SLAM system to some extent.

Keywords: Indoor Positioning System; SLAM; back-end optimization; positional trajectory.

MeSH terms

  • Algorithms
  • Optical Devices*