An Optical Approach for Cell Pellet Detection

Abstract

Cell-based screening methods are increasingly used in diagnostics and drug development. As a result, various research groups from around the world have been working on this topic to develop methods and algorithms that increase the degree of automation of various measurement techniques. The field of computer vision is becoming increasingly important and has therefore a significant influence on the development of various processes in modern laboratories. In this work we describe an approach for detecting two height information, the phase boundary of a cell pellet and the bottom edge of the tube, and thereby a method for determining the highest point of the topology. The starting point for the development of the method described are cells obtained by various procedures and stabilized by a fixative. Centrifugation of the tube causes the cells to settle to the bottom of the tube, resulting in a cell pellet with a clear phase boundary between the cells and the fixative. For further studies, the supernatant fixative has to be removed without reducing the number of cells. The fixative is to be extracted automatically by a liquid robot, which is only possible by accurately determining the cell pellet height. Due to centrifugation, an uneven topology is formed, which is why the entire phase boundary must be examined to detect the highest point of the cell pellet. For this approach, the tube to be examined, which contains the cells and the fixative, is rotated 360° in defined small steps after centrifugation. During rotation, an image is captured in each step, after which a defined image area is separated from the center of the image and merged into a panoramic image. This produces a panoramic image of the cell topology which represents the complete phase boundary, the boundary located on the outside of the tube. This panoramic image is modified through various image processing steps to extract and detect the phase boundary. Various image processing algorithms from the OpenCV library are used. In the first step, the panoramic image is convolved with a Gaussian blur filter to reduce noise. In the following step, a black and white image is generated by a thresholding process. This black and white image, or binary image, is convolved with a Sobel operator in the x and y directions and the results are superimposed. This overlaid image shows the top edge of the cell pellet and other edges located in the image. A logical exclusion method of the obtained boundaries is used for the detection of the phase boundary. To detect the tube bottom, a multilevel model was trained in advance with an appropriate data set. This model can detect and localize in near real time the tube bottom in an image. By using the two-height information of the different boundaries, phase boundary and tube bottom, the highest point of the cell pellet can be detected. This information is then passed on to a higher-level process so that the liquid robot can approach this point with the pipette tip to remove the excess fixative. By determining the highest point, the probability of being able to remove a larger amount of fixative without reducing the number of cells is highest. This ensures that post-processing studies have the largest possible number of cells available with complete automation.

Keywords: Cell pellet detection; Classifier model; Image processing; OpenCV, Laboratory automation; Optical detection; Phase boundary.