High equipment cost is a significant entry barrier to research for small organizations in developing solutions to air pollution problems. Low-cost electrochemical sensors show sensitivity at parts-per-billion by volume mixing ratios but are subject to variation due to changing environmental conditions, in particular temperature. In this study, we demonstrate a low-cost Internet of Things (IoT)-based sensor system for nitric oxide analysis. The sensor system used a four-electrode electrochemical sensor exposed to a series of isothermal/isohume conditions. When deployed under these conditions, stable baseline responses were achieved, in contrast to ambient air conditions where temperature and humidity conditions may be variable. The interrelationship between working and auxiliary electrodes was linear within an environmental envelope of 20-40 °C and 30-80% relative humidity, with correlation coefficients from 0.9980 to 0.9999 when measured under isothermal/isohume conditions. These data enabled the determination of surface functions that describe the working to auxiliary electrode offsets and calibration curve gradients and intercepts. The linear and reproducible nature of individual calibration curves for stepwise nitric oxide (NO) additions under isothermal/isohume environments suggests the suitability of these sensors for applications aside from their role in air quality monitoring. Such applications would include nitric oxide kinetic studies for atmospheric applications or measurement of the potential biocatalytic activity of nitric oxide consuming enzymes in biocatalytic coatings, both of which currently employ high-capital-cost chemiluminescence detectors.
Keywords: IoT; air pollution; gas detection; gas sensor; low-cost sensor; nitric oxide.