Thermal imaging plays a vital role in structural health monitoring of various materials and provides insight into the defect present due to aging, deterioration, and fault during construction. This study investigated the effectiveness of spatial filters during pre-processing of thermal images and a correlation technique in post-processing, as well as exploited its application in non-destructive testing and evaluation of defects in steel structures. Two linear filters (i.e., Gaussian and Window Averaging) and a non-linear filter (i.e., Median) were implemented during pre-processing of a pulsed thermography image sequence. The effectiveness of implemented filters was then assessed using signal to noise ratio as a quality metric. The result of pre-processing revealed that each implemented filter is capable of reducing impulse noise and producing high-quality images; additionally, when comparing the signal to noise ratio, the Gaussian filter dominated both Window Averaging and Median filters. Defect size was determined using a correlation technique on a sequence of pulsed thermography images that had been pre-processed with a Gaussian filter. Finally, it is concluded that the correlation technique could be applied to the fast measurement of defect size, even though the accuracy may depend on the detection limit of thermography and defect size to depth ratio.
Keywords: noise; pulsed thermography; signal to noise ratio; spatial filtering; thermal imaging.