The flexural properties of six 120 × 300 × 4500 mm concrete beams reinforced with bars made from basalt fiber-reinforced polymer (BFRP) basalt fibers and concrete stirrups were investigated. The beams contained different concrete compositions (with or without basalt fibers). Steel and BFRP bars were used as longitudinal and shear reinforcement. As expected, all the beams failed by the crushing of the concrete in the top compression fibers because of using BFRP bars. Beams with BFRP bars should be designed to fail by concrete crushing because it is safer than a brittle failure of the bars. The beams with composite reinforcement were characterized by the greatest number of cracks with the largest crack width. The use of basalt fibers resulted in slightly reduced cracks in beams. The most significant deflections were recorded for the beams with BFRC composite reinforcement, the smallest for FRC beams. Adding basalt fibers to the concrete resulted in slightly reduced deflection of FRC beams compared to RC beams and significantly reduced deflection compared to BFRC beams. Results showed that introducing basalt fibers to the concrete increased curvature ductility of these beams. A theoretical analysis of flexural capacity showed that the ACI standard design is more similar to experimental values (0.87). A more restrictive standard, as it turns out, is the fib Model Code (0.68).
Keywords: basalt fiber-reinforced polymer; basalt fiber-reinforced polymer stirrups; basalt fibers; flexural capacity.