The characteristics of local strain distribution and evolution of duplex stainless steel during the tensile process were studied using the digital image correlation (DIC) technique. In addition, the finite element inversion of nanoindentation experiments of austenitic and ferrite phases in duplex stainless steel was carried out to obtain the stress-strain response of the two phases. Further, based on the representative volume element (RVE) and the material parameters obtained from the finite element inversion method, the local stress and strain behavior of duplex stainless steel at microscale was simulated numerically. The results fit well with the experiments, showing that the austenite phase is softer than ferrite phase, with the larger strain zone concentrated in the austenite phase and the larger stress zone concentrated in the ferrite phase. The grain boundaries are prone to obvious stress and strain concentrations. The local stress and strain distributions are influenced by the shape and interaction of the grains, while the distribution features become more obvious as the load increases. The research results effectively reveal the two-phase interaction and local failure mechanism of duplex stainless steel, and may provide a reference for material preparation and safety design of related structures.
Keywords: digital image method; duplex stainless steel; finite element; local stress and strain distribution; nanoindentation.