The combination of thermal field sensing and microwave operation is an innovative topic in metamaterials. Although there exists research on modulating electromagnetic waves by controlling each column of the metasurface elements for programmable metasurfaces, the regulation is not flexible. In view of this, this paper proposes a metasurface based on distributed thermal sensing that can be independently modulated by each element. In this paper, the metasurface adopts a 1-bit coding metasurface, which is combined with PIN diodes to modulate the phase response. The voltage control circuit feeds back the change in the thermistors to the switching state of the PIN diode. Each metasurface unit contains thermistors, which are used to sense thermal stimulation and can be independently modulated. The metasurface composed of these elements can feel the field generated via heat energy. We can control electromagnetic waves by controlling this field. In order to prove the feasibility of this scheme, a metasurface sample of 8 × 8 elements was designed. Three patterns were used for the design, fabrication, and measurement of the samples. Meanwhile, printed circuit board (PCB) technology was applied. The results show that the simulated results are highly consistent with the experimental results, which verifies that this scheme is practicable.
Keywords: metasurface; reprogrammable; thermal-sensing.