These studies assessed the pressure forces exerted by horses to extract forage from haynets. Study 1 measured horse posture and pressure in Newtons (10 N = 1 kg Force) exerted on haynets when feeding from either a single (SH) or double layered (DH) haynet (3 kg Hay), hung low or high. Mean and maximum pull forces were higher for the DH vs. SH (DH: 81 ± 2 N, max 156 N; SH: 74 ± 2.9 N, max 121 N; p < 0.01). Horses pulled harder on low (max pull 144 ± 8 N) compared to high (109 ± 8 N; p < 0.05) hung haynets. Mean maximum angles (nose-poll-withers) recorded were 90° ± 9 for SH and 127° ± 10 for DH (p < 0.01). Study 2 was a latin square design measuring forces exerted by 10 horses when eating from haynets (6 kg fill) with hay or haylage and attached to the wall at single or double points. Pull pressures were significantly higher when eating haylage compared to hay (mean: 7.5 kg vs. 2 kg and max: 32 kg versus 12 kg, respectively, (p < 0.001). Forage type and fracture properties had the greatest effect on apprehension rates of hay from haynets. In this study, the majority of force exerted when eating from haynets was below 70 N for hay and for haylage 50% of pulls were higher than 50 N with 8% of pulls above 200 N.
Keywords: equine; haynet; intake behaviour; posture; pull pressure.