Biological-based treatment as the conventional treatment for palm oil mill effluent (POME) in open-ponding system face a well known rate-limiting step which is hydrolysis. In this study, electrochemical oxidation (EO) by a ruthenium oxide-coated titanium (Ti/RuO2) electrode was introduced as a pre-treatment for POME waste activated sludge (WAS). Surface morphology and elemental analysis were investigated using field emission scanning electron microscopy and energy dispersive X-ray spectroscopy, respectively. Response surface methodology type central composite design was used in this study to understand the relationship between the independent and dependent variables. Analysis of variance (ANOVA) was used to validate the model of the studied variables. The correlation coefficients (R2) indicated a close agreement between the experimental results and the predicted values, with high R2 values of 0.9044-0.9773. Multiple response optimization suggested that the range of current density (17-27 mA/cm2) and electrolysis time (55-75 min) at a fixed concentration of sodium chloride (10 g/L), resulted in mixed liquor volatile suspended solids (MLVSS) removal >20%, capillary suction timer (CST) reduction >43%, extracellular polymeric substances (EPS) increment <19% and soluble chemical oxygen demand (sCOD) increment >25%. EO appears to be an efficient pre-treatment as well as practical way to improve the POME WAS disintegration and dewaterability.