The potential use of gelatin materials in the liquid composite molding manufacturing (LCM) process was investigated, with specific focus on the reinforcement deformation phenomenon. The adoptability of gelatin as a binder in a composite material with glass fiber for application in the LCM process was evaluated by analyzing the permeability and microscopic structure of the gelatin-coated glass fiber. To assess the tow deformation, the permeability of the non-crimped unidirectional glass fiber mat was evaluated at different flow rates that could be applied in the LCM process. Hysteresis of the permeability was observed as the flow rate increased and decreased, indicative of tow deformation. The permeability of the gelatin-treated glass fiber mat exhibited a relatively smaller variation than that of the untreated glass fiber at the same flow rate. Tow deformation in the untreated and gelatin-treated non-crimped glass fiber mats at different flow rates was evaluated by microscopic analysis and quantified using the tow thickness index. Relatively smaller variations in the permeability and minimal changes in the tow thickness of the gelatin-treated glass fiber mat were observed via microscopic analysis, indicating that gelatin effectively maintained the binding structure of the glass fiber mat.
© 2022. The Author(s).