Air-Stable Li3SbS4-LiI Electrolytes Synthesized via an Aqueous Ion-Exchange Process and the Unique Temperature Dependence of Conductivity

Reiko Matsuda; Hiroyuki Muto; Atsunori Matsuda

doi:10.1021/acsami.2c08723

Air-Stable Li₃SbS₄-LiI Electrolytes Synthesized via an Aqueous Ion-Exchange Process and the Unique Temperature Dependence of Conductivity

ACS Appl Mater Interfaces. 2022 Nov 23;14(46):52440-52447. doi: 10.1021/acsami.2c08723. Epub 2022 Nov 4.

Authors

Reiko Matsuda¹, Hiroyuki Muto^{1

2}, Atsunori Matsuda¹

Affiliations

¹ Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempakhu-cho, Toyohashi, Aichi441-8580, Japan.
² Institute of Liberal Arts and Sciences, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku-cho, Toyohashi, Aichi441-8580, Japan.

PMID: 36332184
DOI: 10.1021/acsami.2c08723

Abstract

The stability of sulfide-based solid electrolytes (SEs) in ambient air is a critical criterion for the application of all-solid-state lithium-ion batteries. Air-stable Li₃SbS₄-LiI SEs were synthesized using a unique process in an aqueous solution under ambient air, i.e., an ion-exchange (IE) process. The crystalline structure of Li₃SbS₄ obtained by this process was confirmed by X-ray diffraction (XRD) patterns. The ionic conductivity of the obtained SE was 8.5 × 10^-8 S cm^-1 at 50 °C. The SEs of Li₃SbS₄-LiI were also synthesized via the IE process. The temperature dependence of the Li₃SbS₄-LiI SEs' ionic conductivities showed a unique behavior; for example, the conductivities of 60Li₃SbS₄·40LiI (LSbSI) rapidly increased upon heating from 1.8 × 10^-7 S cm^-1 at 26.5 °C to 8.4 × 10^-3 S cm^-1 at 65 °C. The LiI layers on LSbSI are responsible for the unique temperature dependence of conductivity determined by differential scanning calorimetry-XRD measurement. Further, the dehydrated LSbSI obtained by milling and annealing showed a high conductivity of 1.3 × 10^-4 S cm^-1 at a low temperature of 25 °C. A cathode composite containing the active material of Ti₂S and the LSbSI SE obtained via the IE process was prepared by freeze-drying. The all-solid-state cell using the cathode composite, which consists of Li-In/SE/TiS₂-LSbSI, showed good performance at 60 °C as a lithium-ion secondary battery.

Keywords: air-stable; electrolyte; ion-exchange; lithium conductor; sulfide.