It is critical to thoroughly investigate, characterize, and understand the unique emission profiles of common and novel polymer feedstocks used in fused filament fabrication (FFF) 3D printers as these products become increasingly ubiquitous in consumer and industrial environments. This work contributes unique insights regarding the effects of polymer composite feedstocks with metal, ceramic, or carbonaceous particle additives on particulate emissions in a variety of filaments under various print conditions, including print temperature. In addition to active characterization of particulate size and concentration following the ANSI/CAN/UL 2904 method, particulate sampling and subsequent analysis by scanning electron microscopy revealed agglomeration behavior that may have important health implications. Specifically, fine particles (0.3-2.5 μm) generated by certain filaments including acrylonitrile butadiene styrene (ABS) and glycol-modified poly(ethylene terephthalate) (PETG) are shown to be formed via agglomeration of emitted ultrafine particles rather than composed of coherent primary particles; accordingly, transport and behavior of these particulates after inhalation may not follow expected patterns for micrometer-sized particles. Structures resembling carbonaceous additives (e.g., graphene and nanotubes) were also captured by airborne sampling during printing of filaments containing carbonaceous advanced materials.
Keywords: 3D Printing; additive manufacturing; advanced materials; emissions; exposure; nanoparticles.
© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.