In this study, a multi-residue analysis was developed for 32 compounds, including pesticides and metabolites, in five meat products using gas chromatography-tandem mass spectrometry (GC-MS/MS). The validation of the developed analytical method was also evaluated in accordance with Codex Alimentarius guidelines. Aminopropyl (NH2), C18, and florisil solid phase extraction (SPE) cartridges were used to evaluate and optimize the cleanup procedure of the tested samples prior to GC-MS/MS analysis. Based on the analytical performance, the C18 SPE cartridge was deemed to be the most suitable among the examined SPE cartridges. The optimized method demonstrated that 29 out of 32 tested compounds acquired good linearity (R2 ≥ 0.99), and 25 tested compounds displayed the method limit of quantification (MLOQ) ≤ 0.01 mg/kg. Out of the 32 tested compounds, only 21 compounds met the acceptable analytical criteria for the lard and tallow samples, compared to 27 compounds in the beef, pork, and chicken samples that falls within the acceptable standards for recovery (70-120%) and analytical precision (relative standard deviation RSD ≤ 20%). The average matrix effect was widely varied (20.1-64.8%) in the studied meat samples that were affected by either ion enhancement or suppression. In particular, in the lard sample, 13 compounds showed poor recovery and analytical precision due to ion suppression. Thus, the matrix effect (ME) was considered a critical factor during multi-residue pesticide analysis in different meat products. In conclusion, this developed analytical method can be used as a routine monitoring system for residual pesticide analysis in livestock products with acceptable analytical standards. Further meticulous analytical studies should be optimized and validated for multi-residue pesticide analysis in diversified meat products.
Keywords: GC-MS/MS; SPE cartridges; matrix effect; meat products; multi-residue analysis; pesticides determination.