Extraction and characterization of natural lignocellulosic fibres from Typha angustata grass

Abstract

In recent years, efforts have been made to reduce deforestation to conserve the ecosystem. In the current scenario, agro-cultivated products are used instead of wood for engineering applications. Thus, natural lignocellulosic fibres are used as a reinforcing material and have been extremely attractive to industries and the scientific community during the past few decades. This study aimed to examine the use of natural fibres extracted from Typha angustata grass as reinforcement in polymer matrix composites. The density of the fibres was 1.015 g/cc. Chemical analysis confirmed that T. angustata fibres (TAFs) have a cellulose content of 73.54 wt%, a hemicellulose content of 10.11 wt%, a lignin content of 6.23 wt% and a wax content of 0.23 wt%. The crystallinity index (65.16 %) and crystalline size (6.40 nm) were identified by X-ray diffraction (XRD) analysis. The presence of functional groups in the TAFs was examined by employing Fourier-transform infrared spectroscopy (FTIR). The presence of cellulose at peak intensities of C2, C3 and C5 in the TAFs was confirmed using ¹³C nuclear magnetic resonance (NMR) spectroscopy. The single fibre tensile test revealed that the tensile strength was 665 ± 7 MPa and Young's modulus was 27.45 ± 3.46 GPa. The thermal stability of the TAFs was examined by thermogravimetric analysis (TGA), and the prominent peak was observed at 298.48 °C, with a kinetic activation energy of 67.99 kJ/mol. The surface roughness of the fibres was analysed by atomic force microscopy (AFM) with an accuracy of 1 nm. The above-mentioned outcomes indicated that the TAFs have desirable properties that are comparable to existing natural fibres and suggested to be utilised as the possible reinforcement to fabricate the fibre-reinforced polymer matrix composites.

Keywords: AFM; FTIR; NMR; Single fibre tensile test; TGA; Typha angustata fibres; XRD.