High-intensity focused ultrasound transducers operating at 4 MHz based on lead-free piezoceramics from the sodium bismuth titanate (NBT) family are described. First, the piezoelectric material (Pz12X) is evaluated from the standpoint of transducer design and its important characteristics, including temperature dependance of several parameters such as dielectric and mechanical coefficients. Then, the performance of six transducers of the same design is evaluated in terms of electro-acoustic efficiency and its dependency on the operating acoustic power level up to 30 W. Overall, the initial electro-acoustic efficiency of three independent transducers is approximately 50% at low acoustic power levels and slightly drops down to 42% as the input electric power reaches 10 W. This process is stable and fully reversible. Moreover, the stability of electro-acoustic efficiency over extended power burst cycling is studied using another two transducers up to 95 × 103 power bursts of 250-ms duration and acoustic power of 10 W. This protocol is beyond the typical clinical use of similar devices in practice. No significant changes in electro-acoustic performance are noted. Additionally, the input electric power and the output acoustic power, together with the temperature of the piezoelectric component, are evaluated simultaneously over the period of one power burst. It is found that the maximum operating temperature over a high-input electric power burst of 600 J is below 60°C, which defines the operational limit for such devices, as the de-poling temperature of the lead-free material is around 85°C. It is found that the lead-free material from the NBT family is also a promising alternative to lead-based PZT-type materials in high-power therapeutic ultrasound.
Keywords: Lead free, High-intensity focused ultrasound, Electro-acoustic efficiency; Transducer, Piezoelectric, Tissue-mimicking phantom.
Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.