Can the Supido Radar Be Used for Measuring Ball Speed during Soccer Kicking? A Reliability and Concurrent Validity Study of a New Low-Cost Device

Sensors (Basel). 2022 Sep 17;22(18):7046. doi: 10.3390/s22187046.

Abstract

The aim was to analyze the reliability and validity of a low-cost instrument, based on a radar system, to quantify the kicking ball speed in soccer. A group of 153 male soccer players (under-13, n = 53; under-15, n = 54; under-18, n = 46) participated in this study. Each player performed three kicks on the goal in a standardized condition while the ball speed was measured with three different devices: one Radar Stalker ATS II® (reference criterion) and two Supido Radar® (Supido-front of the goal and Supido-back of the goal). The standard error of measurement (SEM) expressed as a coefficient of variation (CV) and the intraclass correlation coefficient (ICC) were employed for assessing the reliability of each instrument. Stalker and Supido-back showed very high absolute (CV = 4.0-5.4%) and relative (ICC = 0.945-0.958) reliability, whereas Supido-front resulted in moderate to low reliability scores (CV = 7.4-15%, ICC = 0.134-0.693). In addition, Lin's concordance correlation coefficient (CCC) values revealed an 'almost perfect' agreement between Stalker and Supido-back for the average (r = 0.99) and maximal (r = 0.98) ball speed, regardless of the ball speed range analyzed. However, Supido-front resulted in a poor degree of concordance (CCC = 0.688) and a high magnitude of error (17.0-37.5 km·h-1) with the reference Stalker radar gun. The Supido Radar® placed behind the goal could be considered a reliable and valid device for measuring ball speed in soccer.

Keywords: agreement; concordance; kicking ball speed; physical performance; radar; reproducibility.

MeSH terms

  • Cohort Studies
  • Humans
  • Male
  • Motivation
  • Radar
  • Reproducibility of Results
  • Soccer*

Grants and funding

DMD-F are supported by the Ministry of Science, Innovation and Universities of the government of Spain (grant number: FPU19/04608).