In this paper, the surface roughness of SiC ceramics was investigated in laser-assisted machining (LAM) processes; machine learning was used to predict surface roughness and to optimize the process parameters, and therefore, to ultimately improve the surface quality of a workpiece and obtain excellent serviceability. First, single-factor turning experiments were carried out on SiC ceramics using LAM according to the material removal mechanism to investigate the variation trend of the effects of different laser powers, rotational speeds, feed rates, and cutting depths on surface roughness. Then, laser power, rotational speed, feed rate and cutting depth were selected as the four factors, and the surface roughness was used as the target value for the orthogonal experiments. The results of the single-factor experiments and the orthogonal experiments were combined to construct a prediction model based on the combination of the grey wolf optimization (GWO) algorithm and support vector regression (SVR). The coefficient of determination (R2) of the optimized prediction model reached 0.98676 with an average relative error of less than 2.624%. Finally, the GWO algorithm was used to optimize the global parameters of the prediction model again, and the optimal combination of process parameters was determined and verified by experiments. The actual minimum surface roughness (Ra) value was 0.418 μm, and the relative error was less than 1.91% as compared with the predicted value of the model. Therefore, the prediction model based on GWO-SVR can achieve accurate prediction of the surface roughness of SiC ceramics in LAM and can obtain the optimum surface roughness using parameter optimization.
Keywords: GWO-SVR; SiC ceramics; laser-assisted machining (LAM); optimization; surface roughness.