The coal chemical industry generates large amounts of solid waste and volatile organic compounds (VOCs). In this study, the solid waste semi-coke powder obtained in the semi-coke production process was used as a raw material to prepare high-specific surface area semi-coke activated carbon (SAC) by a carbonization and activation process, and a ternary z-scheme heterojunction photocatalyst with high catalytic performance was loaded for synergistic treatment by adsorption and photodegradation to achieve waste treatment with waste. The prepared semi-coke activated carbon has a specific surface area of 619.27 m2 g-1, which can achieve effective adsorption of VOCs. The ternary z-scheme heterojunction photocatalyst BiPO4-BiVO4-g-C3N4 (PVCN) was supported on a semi-coke activated carbon substrate by a one-step sol-gel method. Based on the synergistic effect of adsorption and photocatalysis, the obtained PVCN/SAC material can degrade toluene by 85.6% within 130 minutes under simulated sunlight irradiation, which is 2.43 times that of pure photocatalyst. The rate of degrading toluene can be increased by 4.43 times. Capture experiments showed that superoxide radicals (˙O2-) and hydroxyl radicals (˙OH) were the key active species in the degradation pathway. Even after five cycles, the material maintained 81.6% of the degradation performance. In this work, we deeply investigate the mechanism of semi-coke activated carbon as a matrix for enhancing photocatalytic degradation performance. The findings of this work provide new insights into the efficient degradation of VOCs and provide a good theoretical basis for the development of high-performance photocatalysts.