Aiming at the challenge of bad odors emanating from rotting perishable kitchen waste in summer within the garbage collection chain, the fan-pad system, which is widely used in agricultural facility systems, was applied to the design of community bins. In this regard, a community bin based on a fan-pad operating mechanism was developed. Computational fluid dynamics (CFD) was then used to numerically analyze the cooling effect of the community bin. Under conditions comprising of an outdoor temperature of 35 °C, an installation height of the wet curtain of the cooling system h1, an installation height of the fan h2, and varying distance d between the trash can and the wet curtain, and the average temperature T of 16 temperature measurement points was analyzed. Design-Expert software was used to design the Box-Behnken Design (BBD) experiment, and regression analysis was carried out. Under the optimized parameter combination, the average temperature T of the temperature measurement point was 24.82 °C by simulation. Through field test verification, it was established that the maximum relative error between the temperature of each measuring point and the simulation result was 1.54%, and the average temperature T fluctuated within the range of 0.5 °C of the simulation value.Implications Statement: By creatively integrating the agricultural apparatus with our daily community bin, our research presents great interdisciplinary originality and potential in wide application. Meanwhile, our research also gives a new solution to saving the energy wasted by community dust room based on air conditioner cooling. We hold the believe that our research can arrest great attention of scholars, managers, and people interested in sanitation apparatus. Additionally, our research also provides more theoretical and technical support for the design and application of sanitation collecting apparatus.