Co-presence of fluoride (F-) and nitrate (NO3-) in water causes numerous health complications. Thus, they should be eliminated by an appropriate method like the EC process. In this research, simultaneous removal of F- and NO3- from synthetic aqueous solution and groundwater has been considered by the EC technique under operational parameters like anode materials (un-coated (Al and Fe) and synthesized coated (Ti/TiRuSnO2 and Ti/PbO2)), cathode materials (Cu, St, and Gr), current density (12, 24, and 36 mA/cm2), inter-electrode distance (0.5, 1, and 2 cm), pH (5.5, 7, and 8.5), NaCl concentrations (0.5, 1, and 1.5 g/L), electrolysis time (15, 30, 45, 60, 90, and 120 min), NO3- concentrations (75, 150, and 225 mg/L), and F- concentrations (2, 4, 6, and 8 mg/L) for the first time in this research. The results proved that Al as non-coated anode and Cu as cathode electrodes were more effective in the co-removal of F- and NO3-. The maximum removal efficiencies of 94.19 and 95% were observed at the current density of 36 mA/cm2, 1 cm of inter-electrode distance, pH 7, 1 g/L of NaCl, and 90 min electrolysis time by Al-Cu electrode for F- (2 mg/L) and NO3- (75 mg/L), respectively. The higher efficiency of Al-Cu electrodes was due to the simultaneous occurrence of electrocoagulation, electroreduction, and electrooxidation processes. Al-Cu electrode application considerably diminished f- and NO3- concentrations in the groundwater. Health risk assessment proved that HQ of F- was significantly decreased after treatment by the Al-Cu electrode. Thus, the EC process using an appropriate and effective electrode is a promising technique for treating aqueous solutions containing F- and NO3-.
Keywords: Cathode materials; Co-removal of F(−) and NO(3)(−); Coated anode electrodes (Ti/TiRuSnO(2) and Ti/PbO(2)); EC process; Health risk assessment; Non-coated anode electrodes (Al and Fe).
Copyright © 2022 Elsevier Inc. All rights reserved.