Plastic materials are one of the significant components of construction materials omnipresent in all areas of the industry and everyday life. One of these plastics is polyethylene terephthalate (PET). Due to its processing properties, with a simultaneous low production cost, PET has been used in many industrial applications, including the production of various types of bottles. Moreover, the high consumption of PET bottles causes the accumulation of large amounts of their waste and necessitates finding an effective way to recycle them. Electrospinning is a well-known non-complicated method for the fabrication of nonwovens from polymers and composites, which can be utilized in many fields due to their outstanding properties. In addition, it might be a promising technique for the recycling of plastic materials. Therefore, in this study, the electrospinning approach for the recycling of two types of PET bottle wastes-bottles made of virgin PET and bottles made of recycled PET (PET bottles) has been utilized, and a comparison of the properties of the obtained materials have been performed. The fibers with diameters of 1.62 ± 0.22, 1.64 ± 0.18, and 1.89 ± 0.19 have been produced from solutions made of virgin PET granulate, PET bottles, and PET bottles made of recycled bottles, respectively. Obtained fibers underwent morphological observation using a scanning electron microscope. Physico-chemical properties using FTIR, gel chromatography, and differential scanning calorimetry have been evaluated, and mechanical properties of obtained mats have been investigated. Cytotoxicity tests using the L929 mouse fibroblast cell line revealed no cytotoxicity for all tested materials.
Keywords: electrospinning; fibers; polyethylene terephthalate (PET); recycling.