Sonoprocessing of wetting of SiC by liquid Al: A thermodynamic and kinetic study

Wendi Li; Yuxin Liang; Bangsheng Li; Jicai Feng

doi:10.1016/j.ultsonch.2022.106092

Sonoprocessing of wetting of SiC by liquid Al: A thermodynamic and kinetic study

Ultrason Sonochem. 2022 Aug:88:106092. doi: 10.1016/j.ultsonch.2022.106092. Epub 2022 Jul 15.

Authors

Wendi Li¹, Yuxin Liang², Bangsheng Li³, Jicai Feng⁴

Affiliations

¹ School of Materials Science and Engineering, State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, 150001, China. Electronic address: liwd_hit@163.com.
² School of Materials Science and Engineering, Harbin Institute of Technology, 150001, China. Electronic address: hit1109103@163.com.
³ School of Materials Science and Engineering, State Key Laboratory of Advanced Welding and Joining, National Key Laboratory for Precision Hot Processing of Metals, Harbin Institute of Technology, 150001, China.
⁴ School of Materials Science and Engineering, State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, 150001, China. Electronic address: yangyao-0105@163.com.

Abstract

The sonoprocessing of droplet spreading during the wetting process of molten aluminum droplets on SiC ceramic substrates at 700 °C is investigated in this paper. When wetting is assisted by a 20 kHz frequency ultrasonic field, the wettability of liquid metal gets enhanced, which has been determined by the variations in thermodynamic energy and wetting kinetics. Wetting kinetic characteristics are divided into two stages according to pinning and depinning states of substrate/droplet contact lines. The droplet is static when the contact line is pinning, while it is forced to move when the contact line is depinning. When analyzing the pinning stage, high-speed photography reveals the evidence of oxide films being rapidly crushed outside the aluminum droplet. In this work, atomic models of spherical Al core being wrapped by alumina shell are tentatively built, whose dioxide microstructures are being transformed from face-centered cubic into liquid at the atomic scale. At the same time, the wetting experiment reveals that the oxide films show changes in the period of sonoprocessing from 3rd to 5th second. During the ultrasonic spreading behavior in the late stage, there is a trend of evident expansion of the base contact area. The entire ultrasonic process lasts for no longer than 10 s. With the aid of ultrasonic sinusoidal waves, the wettability of metal Al gets a rapid improvement. Both molecular dynamic (MD) investigations and the experiments results reveal that the precursor film phenomenon is never found unless wetting is assisted by ultrasonic treatments. However, the precursor film appears near the triple line after using ultrasonics in the droplet wetting process, whose formation is driven by ultrasonic oscillations. Due to the precursor film, the ultrasonic wetting contact angle is lower than the non-ultrasonic contact angle. In addition, the time-variant effective ultrasonic energy has been quantitatively evaluated. The numerical expressions of thermodynamic variables are well verified by former ultrasonic spreading test results, which altogether provide an intrinsic explanation of the fast-decreasing contact angle of Al/SiC.

Keywords: Molecular dynamics; Precursor film; Sonoprocessing; Thermodynamics; Wetting.