Mechanically Flexible Thermoelectric Hybrid Thin Films by Introduction of PEDOT:PSS in Nanoporous Ca3Co4O9

Binbin Xin; Lei Wang; Arnaud Le Febvrier; Anna Elsukova; Biplab Paul; Niclas Solin; Per Eklund

doi:10.1021/acsomega.2c02875

Mechanically Flexible Thermoelectric Hybrid Thin Films by Introduction of PEDOT:PSS in Nanoporous Ca₃Co₄O₉

ACS Omega. 2022 Jun 28;7(27):23988-23994. doi: 10.1021/acsomega.2c02875. eCollection 2022 Jul 12.

Authors

Binbin Xin¹, Lei Wang², Arnaud Le Febvrier¹, Anna Elsukova¹, Biplab Paul¹, Niclas Solin², Per Eklund¹

Affiliations

¹ Thin Film Physics Division, Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping, Sweden.
² Electronic and Photonic Materials Division, Department of Physics, Chemistry and Biology (IFM), Linköping University, SE-58183 Linköping, Sweden.

Abstract

Nanoporous Ca₃Co₄O₉ exhibits high thermoelectric properties and low thermal conductivity and can be made mechanically flexible by nanostructural design. To improve the mechanical flexibility with retained thermoelectric properties near room temperature, however, it is desirable to incorporate an organic filler in this nanoporous inorganic matrix material. Here, double-layer nanoporous Ca₃Co₄O₉/PEDOT:PSS thin films were synthesized by spin-coating PEDOT:PSS into the nanopores. The obtained hybrid films exhibit high Seebeck coefficient (∼+130 μV/K) and thermoelectric power factor (0.75 μW cm^-1 K^-2) at room temperature with no deterioration in electrical properties after cyclic bending tests (98% preservation of electrical conductivity after 1000 cycles bending to a bending radius of 3 mm). Compared with the nanoporous Ca₃Co₄O₉ thin film, the mechanical flexibility of the hybrid film can be effectively improved after hybrid with PEDOT:PSS with only a slight decrease of the thermoelectric properties.