Distortion and residual stress are two unwelcome byproducts of welding. The former diminishes the dimensional accuracy while the latter unfavorably affects the fatigue resistance of the components being joined. The present study is a multi-objective optimization aimed at minimizing both the welding-induced residual stress as well as distortion. Current, voltage, and welding speed were the welding parameters selected. It was observed that the parameters that minimize distortion were substantially different from those that minimized the residual stress. That is, enhancing dimensional accuracy by minimizing distortion results in an intensification of residual stresses. A compromise between the two objectives was therefore necessary. The contour plots produced from the response surfaces of the two objectives were overlaid to find a region with feasible parameters for both. This feasible region was used as the domain wherein to apply the novel butterfly optimization algorithm (BOA). This is the first instance of the application of the BOA to a multi-objective welding problem. Weld simulation and a confirmatory experiment based on the optimum weld parameters thus obtained corroborate the efficacy of the framework.
Keywords: BOA; multi-objective optimization; residual stresses; response surface method; welding distortion.