Contactless Small-Scale Movement Monitoring System Using Software Defined Radio for Early Diagnosis of COVID-19

IEEE Sens J. 2021 May 4;21(15):17180-17188. doi: 10.1109/JSEN.2021.3077530. eCollection 2021 Aug 1.

Abstract

The exponential growth of the novel coronavirus disease (N-COVID-19) has affected millions of people already and it is obvious that this crisis is global. This situation has enforced scientific researchers to gather their efforts to contain the virus. In this pandemic situation, health monitoring and human movements are getting significant consideration in the field of healthcare and as a result, it has emerged as a key area of interest in recent times. This requires a contactless sensing platform for detection of COVID-19 symptoms along with containment of virus spread by limiting and monitoring human movements. In this paper, a platform is proposed for the detection of COVID-19 symptoms like irregular breathing and coughing in addition to monitoring human movements using Software Defined Radio (SDR) technology. This platform uses Channel Frequency Response (CFR) to record the minute changes in Orthogonal Frequency Division Multiplexing (OFDM) subcarriers due to any human motion over the wireless channel. In this initial research, the capabilities of the platform are analyzed by detecting hand movement, coughing, and breathing. This platform faithfully captures normal, slow, and fast breathing at a rate of 20, 10, and 28 breaths per minute respectively using different methods such as zero-cross detection, peak detection, and Fourier transformation. The results show that all three methods successfully record breathing rate. The proposed platform is portable, flexible, and has multifunctional capabilities. This platform can be exploited for other human body movements and health abnormalities by further classification using artificial intelligence.

Keywords: CFR; COVID-19; OFDM; SDR; USRP; breathing rate measurement.

Grants and funding

This work was supported in part by the Zayed Health Center at United Arab Emirates University (UAEU) under Grant G00003476, in part by the Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/T021063/1 and Grant EP/R511705/1, and in part by the Taif University Research Supporting, Taif University, Taif, Saudi Arabia, under Project TURSP-2020/277.