A Superconducting-Material-Based Maglev Generator Used for Outer-Space

Adv Mater. 2022 Aug;34(33):e2203814. doi: 10.1002/adma.202203814. Epub 2022 Jul 13.

Abstract

Solar cells are conventionally used to harvest energy in outer space, but they are ineffective in dark locations. Here, it is shown that superconducting materials-which work best in cold environments, such as those found in outer space-provide a mechanism to harvest energy that does not require light. A superconducting magnetic levitation (maglev) magnetoelectric generator (SMMG) can convert mechanical impacts to electricity at its working temperature <90 K. The SMMG device consists of a permanent magnet, a conductive coil, and a superconducting layer (SL). Owing to the existence of the SL, the permanent magnet levitates over the SL and rapidly returns to an equilibrium height after being displaced by a mechanical impact. The impact changes the gap between the levitated magnet and the coil, resulting in a variation in magnetic flux that induces electrical current in the coil. Thus, the SMMG converts low-frequency (<3.7 Hz) mechanical energy to electricity. The output maximum peak voltage, peak power, and peak power density of the SMMG are 4.3 V, 35 mW, and 17.8 W m-2 , respectively, with a load resistance of 300 Ω. The SMMG can charge a capacitor of 10 000 µF to 3.8 V with a continuous impact, which is sufficient to power critical wireless communication. The superconductor works best in cold environments and therefore is well-suited for providing electricity to sensors and communication devices in outer space, particularly in places where the sun may not reach.

Keywords: energy harvesting; maglev; magnetoelectric materials; outer-space; superconducting materials.