Fibers and yarns are part of everyday life. So far, fibers that are also used pharmaceutically have mainly been produced by electrospinning. The common use of spinning oils and the excipients they contain, in connection with production by melt extrusion, poses a regulatory challenge for pharmaceutically usable fibers. In this publication, a newly developed small-scale direct-spinning melt extrusion system is described, and the pharmaceutically useful polyvinyl filaments produced with it are characterized. The major parts of the system were newly developed or extensively modified and manufactured cost-effectively within a short time using rapid prototyping (3D printing) from various materials. For example, a stainless-steel spinneret was developed in a splice design for a table-top melt extrusion system that can be used in the pharmaceutical industry. The direct processing of the extruded fibers was made possible by a spinning system developed called Spinning-Rosi, which operates continuously and directly in the extrusion process and eliminates the need for spinning oils. In order to prevent instabilities in the product, further modifications were also made to the process, such as a the moisture encapsulation of the melt extrusion line at certain points, which resulted in a bubble-free extrudate with high tensile strength, even in a melt extrusion line without built-in venting.
Keywords: Germany; continuous manufacturing; formulation design; hotmelt extrusion; manufacturing science; materials science; spinning process.