The removal of 137Cs from radioactive wastewater remains a huge challenge due to the interference of many coexisting ions. Several tin chalcogenides (X2Sn3Y7, XNa, K; YTe, Se, S) were synthesized and screened for highly selective cesium removal from radioactive wastewater. It was found that Na2Sn3S7 showed the best adsorption performance for low cesium concentrations. Especially after nickel doping, the adsorption capacity and thermal stability of the adsorbent were significantly enhanced. Its maximum adsorption capacity reached 436.72 mg·g-1 within only 5 min and adsorption performance kept active in the pH range of 2-12. After being coated with a porous polysulfone (PSF) fiber, the developed PSF-Na2.1Ni0.05Sn2.95S7 was applied to natural complex water with cesium concentration of 17.58 mg·L-1. The separation factors between Cs+ and competitive ions ranged from 625.21 to 13123.21. It is noteworthy that NaNO3 was an efficient regenerating agent and can be easily separated from the CsNO3 mixture for cyclic utilization. Remarkably, only 45 min in each cycle of adsorption and desorption toward cesium was realized, and the adsorption properties hardly decreased even after 50 consecutive cycles. The above advantages make the proposed material an excellent candidate for efficient Cs+ removal and enrichment from wastewater.
Keywords: Adsorption; Cesium; Doping; Layered tin chalcogenides; Wastewater.
Copyright © 2022 Elsevier B.V. All rights reserved.