Microbial desalination cells (MDC) syndicate the advantage of physical separation by using membranes to create conditions required for Bioelectrochemical processes for the treatment of various domestic and industrial wastewater, while simultaneously desalinating saline water and generating bioenergy. However, since the introduction of this technology, heavy metal removal has been a challenge, and membrane fouling has become a major bottleneck limiting the optimum performance and efficiency of this technology. This study incorporated the use of ZIF-8 nanocomposite membrane via phase inversion mechanism in MDC for simultaneous heavy metal removal and membrane biofouling prevention. The study was conducted in two MDC systems; MDC-Control (without the ZIF-8 nanocomposite membrane) and MDC with ZIF-8 nanocomposite membrane. The results from the experiment shown that maximum removal efficiency of 85.7%, 84.3%, 84.0%, and 90.61% was obtained for Cu2+, Zn2+, Pb2+, and Cd2+ respectively in MDC-ZIF-8, while MDC control showed 54.17%, 59.71%, 51.94%, and 54.17%. The results were well fitted to the Langmuir adsorption isotherm with correlation coefficients (R2) > 0.99 in all cases for MDC-ZIF-8. A maximum adsorption capacity (Qmax) of 292 mg g-1 was attained for all four metal ions in MDC-ZIF-8. Besides, after 38 days of continuous operation with two complete desalination for both systems, the SEM-EDS characterization analysis, polarization characteristics, and power generation revealed antifouling characteristics of ZIF-8 nanocomposite membrane incorporated in MDC. The integration of the ZIF-8 nanocomposite membrane proved to be simultaneously efficient in biofouling prevention and heavy metal removal without jeopardizing the system's ability for wastewater treatment, bioelectricity generation, and desalination processes.
Keywords: Biofouling; Heavy metals; Microbial desalination cells; Zeolitic imidazolate framework-8.
Copyright © 2022 Elsevier Ltd. All rights reserved.