Evanescent wave absorption-based mid-infrared chalcogenide fiber sensors have prominent advantages in multicomponent liquid and gas detection. In this work, a new approach of tapered-fiber geometry optimization was proposed, and the evanescent efficiency was also theoretically calculated to evaluate sensing performance. The influence of fiber geometry (waist radius (Rw), taper length (Lt), waist deformation) on the mode distribution, light transmittance (T), evanescent proportion (TO) and evanescent efficiency (τ) is discussed. Remarkably, the calculated results show that the evanescent efficiency can be over 10% via optimizing the waist radius and taper length. Generally, a better sensing performance based on tapered fiber can be achieved if the proportion of the LP11-like mode becomes higher or Rw becomes smaller. Furthermore, the radius of the waist boundary (RL) was introduced to analyze the waist deformation. Mode proportion is almost unchanged as the RL increases, while τ is halved. In addition, the larger the micro taper is, the easier the taper process is. Herein, a longer waist can be obtained, resulting in larger sensing area which increases sensitivity greatly.
Keywords: evanescent wave; evanescent wave efficiency; sensor; tapered fiber.