The disabled glue on valve surfaces is known to reduce aircraft durability and performance. In this paper, glue contaminants were removed from 2Cr13 stainless valves by dry-type laser processing with a cold air gun and compared with the chemical soaking method. The laser-processed surface was examined by white-light interferometer, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffractometer, hardness tester, and metallographic microscopy. The substrate surface became a little smoother but also had deeper dips due to laser thermal melting. After laser degumming, the new constituent was found in the laser-irradiated region and analyzed as FeCr0.29Ni0.16C0.06, since the ratio of chemical compositions changed. Based on our simulation and experiments, the temperature of the workpiece was effectively controlled by the cold air gun, and its physical properties, including hardness and metallographic structure, were hardly changed. It was shown that laser degumming provides an alternative method for metal valve cleaning.
Keywords: dry-type laser degumming; metal valve; metallographic structure; property variation.