The production of fixed prosthetic restorations requires strength identification in terms of cognition and the targeted clinical applications. The aim of the study is to evaluate the static strength in axial tensile and compression tests of titanium and cobalt alloys for the supporting foundations of crowns and bridges produced using Computer Aided Design and Manufacturing (CAD/CAM) technologies: Direct Metal Laser Sintering (DMLS) and milling. The test materials are samples of Ti6Al4V and CoCrMo alloys obtained using digital technologies and, for comparison purposes, CoCrMo samples from traditional casting. For the studied biomedical alloys, R0.05, Rp0.2, Rm and Ru were determined in the tensile tests, and in the compression tests R0.01, Rp0.2 and the stress σ at the adopted deformation threshold. Tensile and compression tests of titanium and cobalt alloys indicate differences in strength parameters resulting from the technology applied. The manufacturing of the structures by DMLS provides the highest stress values that condition elastic deformations for cobalt biomaterials: R0.05 = 1180 MPa, R0.01 = 1124 MPa and for titanium biomaterials: R0.05 = 984 MPa, R0.01 = 958 MPa. The high resistance to deformation of CoCrMo and Ti6Al4V from DMLS may be beneficial for fixed prosthetic structures subjected to biomechanical stresses in the stomatognathic system and the impact of these structures on the dento-alveolar complex.
Keywords: compression; dental prosthetics; stiffness; supporting structures; tensile.