The health problems caused by water pollution cannot be ignored, and the contribution of pesticides to water pollution has also become increasingly unignorable. The modified semi-coke as an adsorbent for reducing pesticide pollution to water was obtained from activated semi-coke which was modified by nitric acid (HNO3). The semi-coke was obtained by carbonization using 60 mesh walnut shell powder. After acid-base deashing, the semi-coke is dipped into zinc chloride (ZnCl2) solution to obtain activated semi-coke. Through BET analysis, the specific surface areas of semi-coke, activated semi-coke and modified semi-coke were 26.8 m2/g, 243.9 m2/g, and 339.6 m2/g respectively. An extremely high adsorption capacity of the adsorbents which is used to treat wastewater was achieved. The optimum adsorption conditions for modified semi-coke on thiodicarb solution were 30 mg/L of thiodicarb solution, adsorbent dosage of 0.01 g, adsorption temperature of 25 °C and adsorption time of 90 min. The optimum adsorption amount of 29.54 mg/gsor was achieved (sor is the abbreviation for sorbent). Moreover, through kinetics study, the result manifests that the modified semi-coke adsorption process is more fitted to the second-order kinetic model. This study provided a research implication theoretically for the treatment of pesticides in water.