Zwitterionic per- and polyfluoroalkyl substances are increasingly detected in aquatic environments. The magnitude of their concentration and increased frequency of detection worldwide raise questions on their presence in drinking water and associated health risk. Scientific knowledge on the identification of treatment technologies to effectively capture such zwitterionic PFAS from contaminated water sources remains largely unknown. In this study, we investigated the application of anionic organic scavenger ion exchange (IX) resins (A860), nonionic IX resins (XAD 4 and XAD 7), PFAS-specific resins (A694 and A592), and Ti3C2 MXenes (novel two-dimensional metal carbides) for the removal of select fluorotelomer zwitterionic PFAS from natural waters. The cumulative removal of zwitterionic PFAS at pH ∼ 7 follows the order: Ti3C2 MXenes > A694 > A592 > A860 > XAD 4 ∼ XAD 7. Ti3C2 MXenes were able to capture >75% of the total influent zwitterionic PFAS and the performance remained consistent in natural and synthetic water. Ti3C2 MXenes also exhibited efficient regeneration (>90% recovery) with 0.4 M Na2SO3 solution, while the regeneration efficacy of other IX resins generally remained below 20%. Treatment with ∼180 J/cm2 UV dosage in the 0.4 M Na2SO3 regenerant brine solution yielded >99.9% reduction in the zwitterionic PFAS concentration indicating that UV-sulfite systems exhibit promising potential for the treatment of zwitterionic PFAS concentrates.
Keywords: UV−sulfite; adsorption; aqueous film-forming foam (AFFF); degradation byproducts; fluorotelomer betaine; photoreduction; regeneration; two-dimensional (2D) materials.