Epoxy resin composites with commercially available graphene: toward high toughness and rigidity

Jianxiang Sun; Jingqi Ji; Zhigeng Chen; Shumei Liu; Jianqing Zhao

doi:10.1039/c9ra05992j

Epoxy resin composites with commercially available graphene: toward high toughness and rigidity

RSC Adv. 2019 Oct 16;9(57):33147-33154. doi: 10.1039/c9ra05992j. eCollection 2019 Oct 15.

Authors

Jianxiang Sun¹, Jingqi Ji¹, Zhigeng Chen^{1

2}, Shumei Liu^{1

2}, Jianqing Zhao^{1

2}

Affiliations

¹ School of Materials Science and Engineering, South China University of Technology Guangzhou 510641 P. R. China chenzg@scut.edu.cn psjqzhao@scut.edu.cn.
² The Key Laboratory of Polymer Processing Engineering, Ministry of Education Guangzhou 510641 P. R. China.

Abstract

Some commercially available graphene (CG) samples, actually graphite nanoplates, are difficult to be applied in polymers due to their large thickness, even though their fabrication is more cost-effective. In this work, a CG sample with a thickness of about 25 nm is pre-treated via a facile acid soaking technique, and then the acid-treated CG is introduced into epoxy resin (EP) to improve the toughness while maintaining the high rigidity of the EP. The thickness of the acid-treated CG is dramatically decreased to about 1 nm, well-dispersing CG in the EP matrix. The tensile strength and the fracture energy of EP composite with 0.2 wt% acid-treated CG are increased to 85.2 MPa and 3.6 kJ m^-2 from 74.3 MPa and 2.3 kJ m^-2 of pure EP, respectively. In addition, the tensile-fractured surfaces of EP composites reveal that the toughening mechanism is mainly attributed to the crack deflection and crack pinning caused by the firmly-embedded CG nanosheets in the EP matrix. Besides, the glass transition temperature of EP composites is increased to 170.5 °C from 163.9 °C of pure EP. The present study provides a valuable approach for making use of the cost-effective graphite nanoplates to achieve a similar performance as graphene in EP.