Among different treatments of critical-sized bone defects, bone tissue engineering (BTE) is a fast-developing strategy centering around the fabrication of scaffolds that can stimulate tissue regeneration and provide mechanical support at the same time. This area has seen an extensive application of bioceramics, such as calcium phosphate, for their bioactivity and resemblance to the composition of natural bones. Moreover, recent advances in additive manufacturing (AM) have unleashed enormous potential in the fabrication of BTE scaffolds with tailored porous structures as well as desired biological and mechanical properties. Robocasting is an AM technique that has been widely applied to fabricate calcium phosphate scaffolds, but most of these scaffolds do not meet the mechanical requirements for load-bearing BTE scaffolds. In light of this challenge, various approaches have been utilized to mechanically strengthen the scaffolds. In this review, the current state of knowledge and existing research on robocasting of calcium phosphate scaffolds are presented. Applying the Gibson-Ashby model, this review provides a meta-analysis from the published literature of the compressive strength of robocast calcium phosphate scaffolds. Furthermore, this review evaluates different approaches to the mechanical strengthening of robocast calcium phosphate scaffolds. The aim of this review is to provide insightful data and analysis for future research on mechanical strengthening of robocast calcium phosphate scaffolds and ultimately for their clinical applications.
Keywords: 3D printing; Bone tissue engineering; Calcium phosphate; Gibson-Ashby model; Robocasting; Scaffolds.
Copyright © 2021 Elsevier B.V. All rights reserved.