The accurate determination of fracture toughness (KIc) in rock is of great significance to the study of rock fracture characteristics. However, the effect of contact friction in the loading process on the test results of fracture toughness is rarely considered, and the tested KIc in previous studies is generally higher than the inherent KIc of the material. Based on the ABAQUS software, the influence of friction on the test results of KIc was investigated under different material elastic moduli, loading conditions and specimen sizes by the finite element analysis in this study. The results show that for the specimen with the notch semi-circular bend configuration, if the presence of friction is considered, the changes of load level, the span of roller support and the specimen size can significantly affect the test results of fracture toughness, except the elastic modulus of the material; if the influence of friction is not considered, there will be a large deviation in the research results of the size effect of fracture toughness in rock. As the friction coefficient increases, the estimated value of the fracture energy increases, while the fracture process zone length decreases for the specimen with an infinite size.
© 2022. The Author(s).